Engineering Consulting
Material selection, process optimization and failure analysis by experienced plastics engineers.
Learn more about Consulting →Injection Molding Prototypes in 48h — Switzerland
Why settle for 3D print substitutes when you need the real material? Our additively manufactured precision tools deliver genuine injection molded parts — with the same material properties as the later series.
48h
Delivery from
1–500
Parts per order
±0.1 mm
Typical tolerance
100%
Real thermoplastic
How it works:
1
Send CAD file
Upload STEP, STL or IGES. We check the geometry for injection molding suitability.
2
Quote within 24h
You receive cost estimate, material assessment, delivery time and technical notes before approval.
3
Additive Tooling
The tool is additively manufactured. No expensive steel tools — lead time in hours instead of weeks.
4
Injection + Quality Control
Processing of your desired thermoplastic including visual inspection and relevant measurement points.
5
Delivery from 48h
Delivery of parts with inspection report. On request with dimensional sheet, material certificate and processing report.
What is Additive Tooling Technology?
With Additive Tooling Technology, injection molds are not machined from metal, but manufactured by additive processes (SLA/DLP with high-performance resins or FDM with engineering thermoplastics).
This allows a drastic reduction in costs and lead times compared to classic steel tools — with sufficient tool life for prototypes and small batches up to 500 parts.
| Criterion | Additive tool | Steel tool |
|---|---|---|
| Lead time | 48–72 hours | 4–12 weeks |
| Costs | Low | High |
| Changes | Simple & fast | Laborious |
| Tool life | Up to 500 parts | >100.000 parts |
| Material | All thermoplastics | All thermoplastics |
Recommended for:
- Functional test with real material
- Design validation before production tool
- Small batch up to 500 pieces
- Bridge until series launch
- Samples for customers and certifications
Available Materials
All common thermoplastics available — ABS, PC, PA, PP, TPU and more. Please state your requirements and we will advise you on the optimal material choice.
plastic.swiss — Branchenverband
Frequently Asked Questions
Which file formats are accepted?
We accept STEP, STL, IGES and PDF drawings. STEP is preferred for precise dimensional accuracy. For complex geometries we recommend STEP + PDF drawing.
How long does it take?
For simple geometries we deliver prototypes within 48 hours of order confirmation. For more complex parts or small batch projects typically 3–5 business days.
Which materials are possible?
Basically all common thermoplastics — from ABS through PA6 to PEEK and COC. Please contact us for specific requirements.
What does a prototype cost?
Costs depend on geometry, material and quantity. Write to us with your CAD file — we create a quote within 24 hours.
Request project
Upload your CAD file and describe your project. We will create a non-binding quote for you within 24 hours.